Description
| range of product | Modicon X80 |
|---|---|
| product or component type | Discrete I/O module |
| discrete input number | 8 |
| input type | Current sink (logic positive) |
| discrete input voltage | 24 V DC, discrete input logic: positive |
| discrete input current | 3.5 mA |
| discrete output number | 8 |
| discrete output type | Solid state |
| discrete output voltage | 24 V 19…30 V DC |
| discrete output current | 0.5 A |
| input compatibility | With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2 With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 type 3 |
|---|---|
| Sensor power supply | 19…30 V |
| current state 1 guaranteed | >= 3 mA |
| current state 0 guaranteed | <= 1.5 mA |
| current per channel | 0.625 A |
| maximum current per module | 5 A |
| maximum leakage current | 0.5 mA at state 0 |
| maximum voltage drop | <1.2 V at state 1 |
| input impedance | 6800 Ohm |
| insulation resistance | > 10 MOhm 500 V DC |
| power dissipation in W | 3.7 W |
| DC typical response time | 4 ms |
| DC maximum response time | 7 ms |
| response time on output | 1.2 ms |
| paralleling of outputs | Yes : 2 maximum |
| typical current consumption | 79 mA at 3.3 V DC 59 mA at 24 V DC |
| current consumption | <= 111 mA at 3.3 V DC <= 67 mA at 24 V DC |
| MTBF reliability | 427772 H |
| protection type | 1 external fuse per group of input channel0.5 A fast blow overvoltage protection on output reverse polarity protection on input reverse polarity protection on output |
| output overload protection | With current limiter With electronic circuit breaker 1.5 In < Id < 2 In |
| output overvoltage protection | With transil diode |
| output short-circuit protection | With 2 A external fuse |
| reverse polarity protection | Reverse mounted diode |
| voltage detection threshold | < 14 V DC preactuator fault < 14 V DC sensor fault > 18 V DC preactuator OK > 18 V DC sensor OK |
| maximum tungsten load | 6 W |
| switching frequency | 0.5/LI² Hz |
| maximum overload time | 15 ms |
| load impedance ohmic | >= 48 Ohm |
| status LED | 1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O |
| net weight | 0.115 kg |
| IP degree of protection | IP20 |
|---|---|
| directives | 2014/35/EU – low voltage directive 2014/30/EU – electromagnetic compatibility |
| dielectric strength | 1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic 1500 V AC at 50/60 Hz 1 minute, primary/secondary 500 V DC 1 minute, between group of inputs and outputs |
| vibration resistance | 3 gn |
| shock resistance | 30 gn |
| ambient air temperature for storage | -40…85 °C |
| ambient air temperature for operation | 0…60 °C |
| relative humidity | 5…95 % at 55 °C without condensation |
| operating altitude | 0…2000 m 2000…5000 m with derating factor |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.5 cm |
| Package 1 Width | 11.0 cm |
| Package 1 Length | 12.0 cm |
| Package 1 Weight | 145.0 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 2.44 kg |
